MaxX lifting magnet for thin-walled loads
Through optimal concentration and distribution of magnetic force over the entire contact surface of the magnet, even thin-walled loads can be lifted.
MaxX lifting magnet for thin-walled loads
Through optimal concentration and distribution of magnetic force over the entire contact surface of the magnet, the lever can be very easily thrown to build up the magnetic field, making your work considerably easier. The MaxX lifting magnet is especially praiseworthy due to its great power through continuous lifting foce without requiring power.
Technical construction: - Solid steel plate construction
- Great power through permanent magnetic force
- Special pre-treatment of all surfaces against rust and wear
- Also usable with cross member
Please note:
The full adhesion force is only achieved on pieces with smooth, flat and clean surfaces, with well magnetized materials and sufficient thickness. Adhesion force loss in case of scaled surfaces: With magnet claw up to 2/3, with load lifting magnets up to 50%
| Load-carrying capacity flat material/minimum wall thickness (mm): 150/8 |
| Prod. no. |
Description |
Load-carrying capacity round material/max. Ø (mm) |
Alte Art.Nr. |
| 120911001 |
Manual lifting magnet, WLL 150kg |
60/240 |
TMMAX150 |
| Load-carrying capacity flat material/minimum wall thickness (mm): 300/10 |
| Prod. no. |
Description |
Load-carrying capacity round material/max. Ø (mm) |
Alte Art.Nr. |
| 120911002 |
Manual lifting magnet, WLL 300kg |
120/290 |
TMMAX300 |
Interesting for you:
-
The electropermanent modules in the SML range provide the ideal solution for the handling of loads w...
-
For vertical and horizontal handling of single metal sheets up to 12 m in length.
-
For turning and transporting round discs and metal sheets weighing up to 2000 kg.