Magnet claw crane operation
The magnet claws are suitable for the horizontal and vertical hoisting of sheet panels.
Magnet claw crane operation
The magnet claws are suitable for the horizontal and vertical hoisting of sheet panels. Hoisted sheet panels can be turned from the vertical to the horizontal position and vice versa.
Application options: Only 1 hoist magnet is required for the panel format 1,000 x 2,000 mm
2 hoist magnets with a small cross beam are required for the panel format 1,500 x 3,000 mm
Please note: The full adhesion force can only be achieved for work pieces with smooth, plane and clean surfaces, materials with good magnetic characteristics and adequate thickness. Loss of adhesion for scaled surfaces. 2/3 for magnet claws, 50% for load hoist magnets
| Load-carrying capacity (kg)/dragging force (kg): 250/100 |
| Prod. no. |
Description |
Sheet thickness from (mm) |
Alte Art.Nr. |
| 120902001 |
Solenoid jaw crane op, lft force 250kg |
4 |
MKK02500 |
| Load-carrying capacity (kg)/dragging force (kg): 300/125 |
| Prod. no. |
Description |
Sheet thickness from (mm) |
Alte Art.Nr. |
| 120902002 |
Solenoid jaw crane op, lft force 300kg |
4 |
MKK03000 |
Interesting for you:
-
The electropermanent modules in the SML range provide the ideal solution for the handling of loads w...
-
For vertical and horizontal handling of single metal sheets up to 12 m in length.
-
For turning and transporting round discs and metal sheets weighing up to 2000 kg.