RUD hoisting device whirl adapter HWA
The connection that fits between your Demag hoisting device and all VIP fork head modular system parts.
RUD hoisting device whirl adapter HWA
The connection that fits between your Demag hoisting device and all VIP fork head modular system parts. Complete with original Demag ball-bearing and made from high-strength hardened special steel.
- Fits single strand lower block hooks and dual strand hook blocks
- Tested in accordance with DIN EN 1677-1 and BGR 500
Please note: In accordance with DEMAG information, for the DC 20 2/1 (with 2,000kg carrying capacity) the DK hook block must be used with switch-off springs because the HWA does not fit the standard DC hook block.
| For Demag hoisting device (type): DK |
| Prod. no. |
Description |
WLL (kg)/fork head connection (mm) |
Alte Art.Nr. |
| HWKD8125 |
RUD HWA 8 DK 1250 |
1250/8 |
HWKD8125 |
| HWKD0200 |
RUD HWA 10 DK 2500 |
2500/10 |
HWKD0200 |
| HWKD6040 |
RUD HWA 6 DK 400 |
400/6 |
HWKD6040 |
| HWKD3500 |
RUD HWA 13 DK 5000 |
5000/13 |
HWKD3500 |
| HWKD6080 |
RUD HWA 6 DK 800 |
800/6 |
HWKD6080 |
| HWKD8080 |
RUD HWA 8 DK 800 |
800/8 |
HWKD8080 |
| For Demag hoisting device (type): PK |
| Prod. no. |
Description |
WLL (kg)/fork head connection (mm) |
Alte Art.Nr. |
| HWKP8100 |
RUD HWA 8 PK (5) 1000 |
1000/8 |
HWKP8100 |
| HWKP0100 |
RUD HWA 10 PK (10) 2000 |
2000/10 |
HWKP0100 |
| HWKP6025 |
RUD HWA 6 PK (1) 250 |
250/6 |
HWKP6025 |
| HWKP6050 |
RUD HWA 6 PK (2) 500 |
500/6 |
HWKP6050 |
| HWKP8050 |
RUD HWA 8 PK (3) 500 |
500/8 |
HWKP8050 |
Electric hazard identified? Averted with VIP-ILG!
Caution when welding hanging loads - protect your lifting gear or crane system from the flow of curr...
Test regulations according to BGR 500 Chapter 2.8 for chain slings
Round steel link chains used as slings must be inspected at least once a year by a competent person....
Sharp edge
A sharp edge always exists if the edge radius "r" is smaller than the thickness "d" of the sling mat...
Useful information on chain lifting tackle
Find out everything you could ever want to know about hoisting chains here.
Interesting for you:
-
The VIP continer hook VCH SL-10 is specially adapted for ISO container corners. It is suitable for v...
-
Rigging gear must be turned out before use - this is done automatically by the UW-PP.
-
Ideal for fine adjustment of heavy loads. Precise horizontal alignment of four load-bearing legs is ...