RUD VIP overload element VCG, individual
The specially calibrated control element VCG offers an immediate, permanent optical display if your hoisting chain is overloaded.
RUD VIP overload element VCG, individual
The specially calibrated control element VCG offers an immediate, permanent optical display if your hoisting chain is overloaded.
The user can install a new control element if the two display stays do not bump together after an overload (slot width > 0.5 mm). A stronger chain must be used if this displayed overload is repeated. The chain must be withdrawn from operation and must be tested in accordance with BGR 500 2.8 if the display stays are bumped together or if they curl.
| Load-carrying capacity (kg): 10000 |
| Prod. no. |
Description |
Nominal chain thickness (mm) |
Alte Art.Nr. |
| 110730005 |
RUD VCG-16, WLL 10.0t |
16 |
VCGVIP16 |
| Load-carrying capacity (kg): 1500 |
| Prod. no. |
Description |
Nominal chain thickness (mm) |
Alte Art.Nr. |
| 110730001 |
RUD VCG-6, WLL 10.5t |
6 |
VCGVIP06 |
| Load-carrying capacity (kg): 16000 |
| Prod. no. |
Description |
Nominal chain thickness (mm) |
Alte Art.Nr. |
| 110730007 |
RUD VCG-20, WLL 16.0t |
20 |
VCGVIP20 |
| Load-carrying capacity (kg): 20000 |
| Prod. no. |
Description |
Nominal chain thickness (mm) |
Alte Art.Nr. |
| 110730006 |
RUD VCG-22, WLL 20000t |
22 |
VCGVIP22 |
| Load-carrying capacity (kg): 2500 |
| Prod. no. |
Description |
Nominal chain thickness (mm) |
Alte Art.Nr. |
| 110730002 |
RUD VCG-8, WLL 2.5t |
8 |
VCGVIP08 |
| Load-carrying capacity (kg): 4000 |
| Prod. no. |
Description |
Nominal chain thickness (mm) |
Alte Art.Nr. |
| 110730003 |
RUD VCG-10, WLL 4.0t |
10 |
VCGVIP10 |
| Load-carrying capacity (kg): 6700 |
| Prod. no. |
Description |
Nominal chain thickness (mm) |
Alte Art.Nr. |
| 110730004 |
RUD VCG-13, WLL 6.7t |
13 |
VCGVIP13 |
Electric hazard identified? Averted with VIP-ILG!
Caution when welding hanging loads - protect your lifting gear or crane system from the flow of curr...
Test regulations according to BGR 500 Chapter 2.8 for chain slings
Round steel link chains used as slings must be inspected at least once a year by a competent person....
Sharp edge
A sharp edge always exists if the edge radius "r" is smaller than the thickness "d" of the sling mat...
Useful information on chain lifting tackle
Find out everything you could ever want to know about hoisting chains here.
Interesting for you:
-
The VIP continer hook VCH SL-10 is specially adapted for ISO container corners. It is suitable for v...
-
Rigging gear must be turned out before use - this is done automatically by the UW-PP.
-
Ideal for fine adjustment of heavy loads. Precise horizontal alignment of four load-bearing legs is ...