RUD VIP identification hanger
Identification hanger for hoisting chains in special VIP quality.
RUD VIP- identification hanger
VIP identification hanger with integrated chain check gauge, G-9216846.9
The chain check gauge can be used to check the following features:
- Wear test of the nominal thickness
- Test of the chain pitch (pitch increase through nominal thickness wear)
- Check of the plasticity related elongation due to overload
| Nominal chain thickness (mm): 10 |
| Prod. no. |
Description |
Type |
Alte Art.Nr. |
| 110713003 |
RUD VKZA-10, w/ integrated control gauge |
VIP |
VKZA0010 |
| Nominal chain thickness (mm): 13 |
| Prod. no. |
Description |
Type |
Alte Art.Nr. |
| 110713004 |
RUD VKZA-13, w/ integrated control gauge |
VIP |
VKZA0013 |
| Nominal chain thickness (mm): 16 |
| Prod. no. |
Description |
Type |
Alte Art.Nr. |
| 110713005 |
RUD VKZA-16, w/ integrated control gauge |
VIP |
VKZA0016 |
| Nominal chain thickness (mm): 20 |
| Prod. no. |
Description |
Type |
Alte Art.Nr. |
| 110713006 |
RUD VKZA-20, w/ integrated control gauge |
VIP |
VKZA0020 |
| Nominal chain thickness (mm): 22 |
| Prod. no. |
Description |
Type |
Alte Art.Nr. |
| 110713007 |
RUD VKZA-22, w/ integrated control gauge |
VIP |
VKZA0022 |
| Nominal chain thickness (mm): 6 |
| Prod. no. |
Description |
Type |
Alte Art.Nr. |
| 110713001 |
RUD VKZA-6, w/ integrated control gauge |
VIP |
VKZA0006 |
| Nominal chain thickness (mm): 8 |
| Prod. no. |
Description |
Type |
Alte Art.Nr. |
| 110713002 |
RUD VKZA-8, w/ integrated control gauge |
VIP |
VKZA0008 |
Electric hazard identified? Averted with VIP-ILG!
Caution when welding hanging loads - protect your lifting gear or crane system from the flow of curr...
Test regulations according to BGR 500 Chapter 2.8 for chain slings
Round steel link chains used as slings must be inspected at least once a year by a competent person....
Sharp edge
A sharp edge always exists if the edge radius "r" is smaller than the thickness "d" of the sling mat...
Useful information on chain lifting tackle
Find out everything you could ever want to know about hoisting chains here.
Interesting for you:
-
The VIP continer hook VCH SL-10 is specially adapted for ISO container corners. It is suitable for v...
-
Rigging gear must be turned out before use - this is done automatically by the UW-PP.
-
Ideal for fine adjustment of heavy loads. Precise horizontal alignment of four load-bearing legs is ...