RUD 3/4 strand VIP hanger head VAK-4
3/4 strand hanger head in special VIP quality for standard crane hook in accordance with DIN 15401
RUD 4 strand VIP hanger head VAK-4
VAK 4 hanger head with 4 welded-in, fully flexible ring forks VRG, with forced connection for chain diameter and number of strands.
- Complete identification hanger with integrated chain check gauge
- Connection bolt and safety pin are pre-installed
- Dimensions in accordance with hanger element form A and interim elements form B in accordance with DIN 5688
- Manufactured in accordance with DIN EN 1677-4
Special hanger heads with an inner width of 140 mm, 190 mm and 250 mm, as well as chain connection without the possibility of a mix-up on request.
| Load-carrying capacity tilt angle up to 45°/60° (kg): 14000/10000 |
| Prod. no. |
Description |
Nominal chain thickness (mm) |
Alte Art.Nr. |
| 110711004 |
RUD VAK 4-13, 3/4-strand hanging head |
13 |
VAK4V013 |
| Load-carrying capacity tilt angle up to 45°/60° (kg): 21000/15000 |
| Prod. no. |
Description |
Nominal chain thickness (mm) |
Alte Art.Nr. |
| 110711005 |
RUD VAK 4-16, 3/4-strand hanging head |
16 |
VAK4V016 |
| Load-carrying capacity tilt angle up to 45°/60° (kg): 3150/2250 |
| Prod. no. |
Description |
Nominal chain thickness (mm) |
Alte Art.Nr. |
| 110711001 |
RUD VAK 4-6, 3/4-strand hanging head |
6 |
VAK4V006 |
| Load-carrying capacity tilt angle up to 45°/60° (kg): 33600/24000 |
| Prod. no. |
Description |
Nominal chain thickness (mm) |
Alte Art.Nr. |
| 110711006 |
RUD VAK 4-20, 3/4-strand hanging head |
20 |
VAK4V020 |
| Load-carrying capacity tilt angle up to 45°/60° (kg): 42000/30000 |
| Prod. no. |
Description |
Nominal chain thickness (mm) |
Alte Art.Nr. |
| 110711007 |
RUD VAK 4-22, 3/4-strand hanging head |
22 |
VAK4V022 |
| Load-carrying capacity tilt angle up to 45°/60° (kg): 5250/3750 |
| Prod. no. |
Description |
Nominal chain thickness (mm) |
Alte Art.Nr. |
| 110711002 |
RUD VAK 4-8, 3/4-strand hanging head |
8 |
VAK4V008 |
| Load-carrying capacity tilt angle up to 45°/60° (kg): 8400/6000 |
| Prod. no. |
Description |
Nominal chain thickness (mm) |
Alte Art.Nr. |
| 110711003 |
RUD VAK 4-10, 3/4-strand hanging head |
10 |
VAK4V010 |
Electric hazard identified? Averted with VIP-ILG!
Caution when welding hanging loads - protect your lifting gear or crane system from the flow of curr...
Test regulations according to BGR 500 Chapter 2.8 for chain slings
Round steel link chains used as slings must be inspected at least once a year by a competent person....
Sharp edge
A sharp edge always exists if the edge radius "r" is smaller than the thickness "d" of the sling mat...
Useful information on chain lifting tackle
Find out everything you could ever want to know about hoisting chains here.
Interesting for you:
-
The VIP continer hook VCH SL-10 is specially adapted for ISO container corners. It is suitable for v...
-
Rigging gear must be turned out before use - this is done automatically by the UW-PP.
-
Ideal for fine adjustment of heavy loads. Precise horizontal alignment of four load-bearing legs is ...