Praktikus coloumn pivoting crane

The praktikus coloumn pivoting crane is designed in accordance with the EU machine guidelines of the newest DIN 15018 H2 B2 and it is in accordance with the VDE and UVV regulations. The crane arm has a bush bearing and can be easily swiveled by hand. All components are steel flint derusted by a machine and are painted with a green primer REAL 6018, the console is black, REAL 9005. the design is especially warp resistant and has a swivel range of 270°. The strong steel pipe column is equipped with additional reinforcements.

Basic electrical system:

Lockable installed line disconnecter, round cable power supply in the area of the crane with cable stay tube up to 3000 mm projection, above 3500 mm projection with round/trailing cable feed.

The following applies to the new electrical chain hoist series:

In addition to the installed contactor control, an overload protection is provided by a friction clutch and standard electrical lift limit switches for the highest hook position. They must not be started under normal operating conditions. The electrical chain hoist is attached to a manual carriage. Operating and control voltage 400 V/50 Hz/ 48 V.

Optional:

• Lift emergency switch-off for starting the load hook under normal operating conditions in the highest hook position
• Electrical carriage
• Bolting plate
• hot-dip/painted for open air use.